Use unique barcodes already on equipment
If Equipment already has a unique barcode (e.g., asset or serial number),
that number can be entered into its equipment record and used to locate
and open its record. Make sure that this barcode is only used once per equipment record
because there is no way for Calibration Control to differentiate
two equipment records with the same barcode number.
Custom Barcode Field
Open an Equipment record and select the Other tab (far right). Enter the unique
custom barcode in the custom Barcode field. The most
accurate way of entering the custom barcode is to place the cursor in the custom Barcode field
and scan the barcode into the field.
Barcode Scan Dialog
Close the Equipment dialog, returning to the Main Browse grid. Press the [F3]
button to bring up the following small dialog. When this
dialog (below) is visible and a barcode is scanned, Calibration Control will know to look in
the custom barcode field in addition to the default field.
Last updated: 4 Jan 2017
Compatibility: Calibration Control versions 7.1 and Higher
Download Calibration Control